신우공조(주)

Floor-Stand (Exposed/Concealed) Upper Discharge Type

Product Features

An electric motor with low vibration, low noise, and a long-lifespan die-cast housing has been applied.

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air. (Exposed Type)

A general MICOM switch and wireless remote controller switch can be attached.Option

Able to apply 4 Pipe configuration.Option

With the application of a BLDC motor as a standard specification power consumption can be reduced by more than 30% compared to an AC motor with low power and high efficiency.Option

For energy savings, installation of On/Off valves for each unit is recommended.Option

These control the flow in coordination with the unit's operation preventing condensation issues during cooling, and reducing unnecessary operation cycles of the circulation pump

Both central control and group control are available.Option

Central control can be achieved through power line communication and S-485 communication

Group control of up to 16 units can be performed using a wired remote controller.

The use of UV lamps provides outstanding effects in terms of sterilization antibacterial properties odor removal, and addressing sick building syndrome.Option

Korean Patent Registration No. 10-1147406

Floor-Stand Exposed, Upper Discharge Type

MODEL	A	B (Outlet)	C (Grille)	D (Motor)	E (Fan)
SFC-20T	940	p120 x 4 = 480	4	1	1
SFC-30T	1060	p120 x 5 = 600	5	1	1
SFC-40T	1180	p120 x 6 = 720	6	1	2
SFC-60T	1420	p120 x 8 = 960	8	1	2
SFC-80T	1660	p120 x 10 = 1200	10	2	3
SFC-120T	1900	p120 x 12 = 1440	12	2	4

No.	DESCRIPTION	MAT'L	Q'TY	REMARK
1	INNER SIDE CASE	ABS	2	-
2	WATER OUTLET	BS	1	PF 3/4"(20A)
3	AIR VENT	BS	1	PT 1/8"(Manual)
4	WATER INLET	BS	1	PF 3/4"(20A)
5	DRAIN PAN	Heat-Resistant ABS	1	Plastic
6	FAN IMPLLER	ABS	E	SIROCCO FAN
7	FAN HOUSING	ABS	E	-
8	DRAIN HOSE	Soft Polyvinyl Chloride	1	Inner Diameter Ø14 Outer Diameter Ø18
9	MOTOR	ASS'Y	D	1Ø 220V 60Hz
10	AIR FILTER	Vinyl Chloride	1	Submerged Type
11	HEAT & COOLING COIL	CU-AL	1	SLIT FIN
12	CONTROL SWITCH	-	1	Rotary Type (Strong, Medium, Weak 3-Stage)
13	GRILLE	Heat-Resistant ABS	C	120*120
14	ACCESS DOOR	ABS	2	120*200
15	EXTERNAL PANEL	CR	1	Powder Coating
16	BASE	Composite PP	2	T/K 30%

Floor-Stand Concealed, Upper Discharge Type

MODEL	A	B (Outlet)	C (Motor)	D (Fan)
SFC-20TM	540	480	1	1
SFC-30TM	660	600	1	1
SFC-40TM	780	720	1	2
SFC-60TM	1020	960	1	2
SFC-80TM	1260	1200	2	3
SFC-120TM	1500	1440	2	4

No.	DESCRIPTION	MAT'L	Q'TY	REMARK
1	INNER SIDE CASE	ABS	2	-
2	WATER OUTLET	BS	1	PF 3/4"(20A)
3	AIR VENT	BS	1	PT 1/8"(Manual)
4	WATER INLET	BS	1	PF 3/4"(20A)
5	DRAIN PAN	Heat-Resistant ABS	1	Plastic
6	FAN IMPELLER	ABS	D	SIROCCO FAN
7	FAN HOUSING	ABS	D	-
8	DRAIN HOSE	Soft Polyvinyl Chloride	1	Inner Diameter Ø14 Outer Diameter Ø18
9	LEVELING BOLT	-	4	6*35mm
10	MOTOR	ASS'Y	C	1Ø 220V 60Hz
11	AIR FILTER	Vinyl Chloride	1	Submerged Type
12	HEAT & COOLING COIL	CU-AL	1	SLIT FIN
13	CONTROL SWITCH	-	1	Rotary Type (Strong, Medium, Weak 3-Stage)

Standard Specifications

Horizontal Scroll

Category		Specifications	SFC-20F,FM		SFC-30F,FM		SFC-40F,FM		SFC-60F,FM		SFC-80F,FM		SFC-120F,FM
Capacity	Capacity Conditions		A	B	A	B	A	B	A	B	A	B	A	B
	Cooling Capacity	W	2,790	2,120	3,700	2,810	5,360	4,050	7,220	5,490	10,440	7,870	13,610	10,260
	Cooling Capacity	Kcal/h	2,400	1,820	3,180	2,420	4,610	3,480	6,210	4,720	8,980	8,980	11,700	8,820
	Heating Capacity	W	5,640	3,460	7,780	4,770	10,990	6,710	14,330	8,760	21,240	12,950	23,640	14,340
	Heating Capacity	Kcal/h	4,850	2,980	6,690	4,100	9,450	5,770	12,320	7,530	18,270	11,140	20,330	12,330
	Flow Rate	ℓ/min	8.1	6.0	10.7	8.0	15.4	11.5	20.8	15.7	30.0	22.4	39.1	29.3
	Head Loss	mAq	0.7	0.4	1.6	0.9	4.4	2.4	3.5	2.0	9.5	5.3	16.8	9.4
Fan Blower	Type		Double Suction Multi-Blade Type(SIROCCO FAN)
	SIZE	mm	Ø145 X L165		Ø145 X L200		Ø145 X L165		Ø145 X L200		Ø145 X L200		Ø145 X L200
	Airflow Volume	㎥/min	5.7		8.5		11.3		17		22.6		34
	Drive Type		Direct Drive Motor
	Quantity	EA	1		1		2		2		3		4
Motor	Type		AC Semi-Enclosed Type (6 poles, Class B insulation
	Power Consumption	W	30		40		50		70		40 + 70		70 X 2
	Quantity	EA	1		1		1		1		2		2
Heat Exchanger	Type		Integrated Multi-Pass Cross Finned Tube(Slit Fin)
Pipe	Inlet	A	PF 3/4" (20A)
	Outlet	A	PF 3/4" (20A)
	Drain		Soft Vinyl Hose (Inner Diameter Ø14, Outer Diameter Ø18)
External Material			Galvanized Steel Sheet, Powder Coating
Air Volume Control			Strong, Medium, Weak 3-Stage Rotary Switch
Power Supply			Single Phase 220V 60HZ
AIR FILTER			Vinyl Chloride (Submerged)
Product Weight		Kg	24(14)		27(16)		31(20)		36(25)		41(32)		44(40)
* Note	1. Capacity Condition A - Cooling Capacity When indoor air is DB 27°C, WB 21°C, and inlet water temperature is 5°C Heating Capacity When indoor air is 18°C, and inlet water temperature is 80°C 2. Capacity Condition B - Cooling Capacity: When indoor air is DB 27°C, WB 19.5°C, and inlet water temperature is 7°C Heating Capacity: When indoor air is 21 °C, and inlet water temperature is 60°C

Catalog

Floor-Stand (Exposed/Concealed) Front Discharge Type

Product Features

An electric motor with low vibration, low noise, and a long-lifespan die-cast housing has been applied.

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air. (Exposed Type)

A general MICOM switch and wireless remote controller switch can be attached.Option

Able to apply 4 Pipe configuration.Option

With the application of a BLDC motor as a standard specification power consumption can be reduced by more than 30% compared to an AC motor with low power and high efficiency.Option

For energy savings, installation of On/Off valves for each unit is recommended.Option

These control the flow in coordination with the unit's operation preventing condensation issues during cooling, and reducing unnecessary operation cycles of the circulation pump

Both central control and group control are available.Option

Central control can be achieved through power line communication and S-485 communication

Group control of up to 16 units can be performed using a wired remote controller.

The use of UV lamps provides outstanding effects in terms of sterilization antibacterial properties odor removal, and addressing sick building syndrome.Option

Korean Patent Registration No. 10-1147406

Floor-Stand Exposed, Front Discharge Type

MODEL	A	B (Outlet)	C (Grille)	D (Motor)	E (Fan)
SFC-20F	940	p120 x 4 = 480	4	1	1
SFC-30F	1060	p120 x 5 = 600	5	1	1
SFC-40F	1180	p120 x 6 = 720	6	1	2
SFC-60F	1420	p120 x 8 = 960	8	1	2
SFC-80F	1660	p120 x 10 = 1200	10	2	3
SFC-120F	1900	p120 x 12 = 1440	12	2	4

No.	DESCRIPTION	MAT'L	Q'TY	REMARK
1	INNER SIDE CASE	ABS	2	-
2	WATER OUTLET	BS	1	PF 3/4"(20A)
3	AIR VENT	BS	1	PT 1/8"(Manual)
4	WATER INLET	BS	1	PF 3/4"(20A)
5	DRAIN PAN	Heat-Resistant ABS	1	Plastic
6	FAN IMPLLER	ABS	E	SIROCCO FAN
7	FAN HOUSING	ABS	E	-
8	DRAIN HOSE	Soft Polyvinyl Chloride	1	Inner Diameter Ø14 Outer Diameter Ø18
9	MOTOR	ASS'Y	D	1Ø 220V 60Hz
10	AIR FILTER	Vinyl Chloride	1	Submerged Type
11	HEAT & COOLING COIL	CU-AL	1	SLIT FIN
12	CONTROL SWITCH	-	1	Rotary Type (Strong, Medium, Weak 3-Stage)
13	GRILLE	Heat-Resistant ABS	C	120*120
14	ACCESS DOOR	ABS	2	120*200
15	EXTERNAL PANEL	CR	1	Powder Coating
16	BASE	Composite PP	2	T/K 30%

Floor-Stand Concealed, Front Discharge Type

MODEL	A	B (Outlet)	C (Grille)	D (Motor)
SFC-20FM	540	480	1	1
SFC-30FM	660	600	1	1
SFC-40FM	780	720	1	2
SFC-60FM	1020	960	1	2
SFC-80FM	1260	1200	2	3
SFC-120FM	1500	1440	2	4

No.	DESCRIPTION	MAT'L	Q'TY	REMARK
1	INNER SIDE CASE	ABS	2	-
2	WATER OUTLET	BS	1	PF 3/4"(20A)
3	AIR VENT	BS	1	PT 1/8"(Manual)
4	WATER INLET	BS	1	PF 3/4"(20A)
5	DRAIN PAN	Heat-Resistant ABS	1	Plastic
6	FAN IMPELLER	ABS	D	SIROCCO FAN
7	FAN HOUSING	ABS	D	-
8	DRAIN HOSE	Soft Polyvinyl Chloride	1	Inner Diameter Ø14 Outer Diameter Ø18
9	LEVELING BOLT	-	4	6*35mm
10	MOTOR	ASS'Y	C	1Ø 220V 60Hz
11	AIR FILTER	Vinyl Chloride	1	Submerged Type
12	HEAT & COOLING COIL	CU-AL	1	SLIT FIN
13	CONTROL SWITCH	-	1	Rotary Type (Strong, Medium, Weak 3-Stage)

Standard Specifications

Horizontal Scroll

Category		Specifications	SFC-20F,FM		SFC-30F,FM		SFC-40F,FM		SFC-60F,FM		SFC-80F,FM		SFC-120F,FM
Capacity	Capacity Conditions		A	B	A	B	A	B	A	B	A	B	A	B
	Cooling Capacity	W	2,790	2,120	3,700	2,810	5,360	4,050	7,220	5,490	10,440	7,870	13,610	10,260
	Cooling Capacity	Kcal/h	2,400	1,820	3,180	2,420	4,610	3,480	6,210	4,720	8,980	8,980	11,700	8,820
	Heating Capacity	W	5,640	3,460	7,780	4,770	10,990	6,710	14,330	8,760	21,240	12,950	23,640	14,340
	Heating Capacity	Kcal/h	4,850	2,980	6,690	4,100	9,450	5,770	12,320	7,530	18,270	11,140	20,330	12,330
	Flow Rate	ℓ/min	8.1	6.0	10.7	8.0	15.4	11.5	20.8	15.7	30.0	22.4	39.1	29.3
	Head Loss	mAq	0.7	0.4	1.6	0.9	4.4	2.4	3.5	2.0	9.5	5.3	16.8	9.4
Fan Blower	Type		Double Suction Multi-Blade Type(SIROCCO FAN)
	SIZE	mm	Ø145 X L165		Ø145 X L200		Ø145 X L165		Ø145 X L200		Ø145 X L200		Ø145 X L200
	Airflow Volume	㎥/min	5.7		8.5		11.3		17		22.6		34
	Drive Type		Direct Drive Motor
	Quantity	EA	1		1		2		2		3		4
Motor	Type		AC Semi-Enclosed Type (6 poles, Class B insulation
	Power Consumption	W	30		40		50		70		40 + 70		70 X 2
	Quantity	EA	1		1		1		1		2		2
Heat Exchanger	Type		Integrated Multi-Pass Cross Finned Tube(Slit Fin)
Pipe	Inlet	A	PF 3/4" (20A)
	Outlet	A	PF 3/4" (20A)
	Drain		Soft Vinyl Hose (Inner Diameter Ø14, Outer Diameter Ø18)
External Material			Galvanized Steel Sheet, Powder Coating
Air Volume Control			Strong, Medium, Weak 3-Stage Rotary Switch
Power Supply			Single Phase 220V 60HZ
AIR FILTER			Vinyl Chloride (Submerged)
Product Weight		Kg	24(14)		27(16)		31(20)		36(25)		41(32)		44(40)
* Note	1. Capacity Condition A - Cooling Capacity When indoor air is DB 27°C, WB 21°C, and inlet water temperature is 5°C Heating Capacity When indoor air is 18°C, and inlet water temperature is 80°C 2. Capacity Condition B - Cooling Capacity: When indoor air is DB 27°C, WB 19.5°C, and inlet water temperature is 7°C Heating Capacity: When indoor air is 21 °C, and inlet water temperature is 60°C

Catalog

Floor-Stand Exposed, Slant Discharge Type(Rounded)

Product Features

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air.

A low-noise, long-life single-phase condenser induction motor is used.

It complements indoor spaces with its elegant curved design.

A general MICOM switch and wireless remote controller switch can be attached.Option

With the application of a BLDC motor as a standard specification power consumption can be reduced by more than 30% compared to an AC motors with low power and high efficiency.Option
For energy savings, installation of On/Off valves for each product is recommended. Option

These control the flow in coordination with the unit's operation preventing condensation issues during cooling, and reducing unnecessary operation cycles of the circulation pump

Both central control and group control are available.Option

Central control can be achieved through power line communication and S-485 communication

Group control of up to 16 units can be performed using a wired remote controller.

The use of UV lamps provides outstanding effects in terms of sterilization antibacterial properties, odor removal, and addressing sick building syndrome.Option

Korean Patent Registration No. 10-1147406

Floor-Stand Exposed, Slant Discharge Type(Rounded)

MODEL	A	B (Outlet)	C (Grille)	D (Motor)	E (Fan)
SFC-20TFV	946	p120 x 4 = 480	4	1	1
SFC-30TFV	1066	p120 x 5 = 600	5	1	1
SFC-40TFV	1186	p120 x 6 = 720	6	1	2
SFC-60TFV	1426	p120 x 8 = 960	8	1	2
SFC-80TFV	1666	p120 x 10 = 1200	10	2	3
SFC-120TFV	1906	p120 x 12 = 1440	12	2	4

No.	DESCRIPTION	MAT'L	Q'TY	REMARK
1	INNER SIDE CASE	GI	2	-
2	WATER OUTLET	BS	1	PF 3/4"(20A)
3	AIR VENT	BS	1	PT 1/8"(Manual)
4	WATER INLET	BS	1	PF 3/4"(20A)
5	DRAIN PAN	Heat-Resistant ABS	1	Plastic
6	FAN IMPLLER	ABS	E	SIROCCO FAN
7	FAN HOUSING	ABS	E	-
8	DRAIN HOSE	Soft Polyvinyl Chloride	1	Inner Diameter Ø14 Outer Diameter Ø18
9	MOTOR	ASS'Y	D	1Ø 220V 60Hz
10	AIR FILTER	Vinyl Chloride	1	Submerged Type
11	HEAT & COOLING COIL	CU-AL	1	SLIT FIN
12	CONTROL SWITCH	-	1	Rotary Type (Strong, Medium, Weak 3-Stage)
13	GRILLE	Heat-Resistant ABS	C	120*120
14	ACCESS DOOR	ABS	2	120*200
15	EXTERNAL PANEL	CR	1	Powder Coating
16	BASE	Composite PP	2	T/K 30%

Standard Specifications

Horizontal Scroll

Category		Specifications	SFC-20TFV		SFC-30TFV		SFC-40TFV		SFC-60TFV		SFC-80TFV		SFC-120TFV
Capacity	Capacity Conditions		A	B	A	B	A	B	A	B	A	B	A	B
	Cooling Capacity	W	2,790	2,120	3,700	2,810	5,360	4,050	7,220	5,490	10,440	7,870	13,610	10,260
	Cooling Capacity	Kcal/h	2,400	1,820	3,180	2,420	4,610	3,480	6,210	4,720	8,980	6,770	11,700	8,820
	Heating Capacity	W	5,640	3,460	7,780	4,770	10,990	6,710	14,330	8,760	21,240	12,950	23,640	14,340
	Heating Capacity	Kcal/h	4,850	2,980	6,690	4,100	9,450	5,770	12,320	7,530	18,270	11,140	20,330	12,330
	Flow Rate	ℓ/min	8.1	6.0	10.7	8.0	15.4	11.5	20.8	15.7	30.0	22.4	39.1	29.3
	Head Loss	mAq	0.7	0.4	1.6	0.9	4.4	2.4	3.5	2.0	9.5	5.3	16.8	9.4
Fan Blower	Type		Double Suction Multi-Blade Type(SIROCCO FAN)
	SIZE	mm	Ø145 X L165		Ø145 X L200		Ø145 X L165		Ø145 X L200		Ø145 X L200		Ø145 X L200
	Airflow Volume	㎥/min	5.7		8.5		11.3		17		22.6		34
	Drive Type		Direct Drive Motor
	Quantity	EA	1		1		2		2		3		4
Motor	Type		AC Semi-Enclosed Type (6 poles, Class B insulation
	Power Consumption	W	30		40		50		70		40 + 70		70 X 2
	Quantity	EA	1		1		1		1		2		2
Heat Exchanger	Type		Integrated Multi-Pass Cross Finned Tube(Slit Fin)
Pipe	Inlet	A	PF 3/4" (20A)
	Outlet	A	PF 3/4" (20A)
	Drain		Soft Vinyl Hose (Inner Diameter Ø14, Outer Diameter Ø18)
External Material			Galvanized Steel Sheet, Powder Coating
Air Volume Control			Strong, Medium, Weak 3-Stage Rotary Switch
Power Supply			Single Phase 220V 60HZ
AIR FILTER			Vinyl Chloride (Submerged)
Product Weight		Kg	23		26		29		34		39		42
* Note	1. Capacity Condition A - Cooling Capacity When indoor air is DB 27°C, WB 21°C, and inlet water temperature is 5°C Heating Capacity When indoor air is 18°C, and inlet water temperature is 80°C 2. Capacity Condition B - Cooling Capacity: When indoor air is DB 27°C, WB 19.5°C, and inlet water temperature is 7°C Heating Capacity: When indoor air is 21 °C, and inlet water temperature is 60°C

Catalog

Floor-Stand Exposed, Slant Discharge Type(Inclined)

Product Features

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air.

A low-noise, long-life single-phase condenser induction motor is used.

It complements indoor spaces with its elegant curved design.

A general MICOM switch and wireless remote controller switch can be attached.Option

With the application of a BLDC motor as a standard specification power consumption can be reduced by more than 30% compared to an AC motors with low power and high efficiency.Option
For energy savings, installation of On/Off valves for each product is recommended. Option

These control the flow in coordination with the unit's operation preventing condensation issues during cooling, and reducing unnecessary operation cycles of the circulation pump

Both central control and group control are available.Option

Central control can be achieved through power line communication and S-485 communication

Group control of up to 16 units can be performed using a wired remote controller.

The use of UV lamps provides outstanding effects in terms of sterilization antibacterial properties, odor removal, and addressing sick building syndrome.Option

Korean Patent Registration No. 10-1147406

Floor-Stand Exposed, Slant Discharge Type(Inclined)

MODEL	A	B (Outlet)	C (Grille)	D (Motor)	E (Fan)
SFC-20FT	940	p120 x 4 = 480	4	1	1
SFC-30FT	1060	p120 x 5 = 600	5	1	1
SFC-40FT	1180	p120 x 6 = 720	6	1	2
SFC-60FT	1420	p120 x 8 = 960	8	1	2
SFC-80FT	1660	p120 x 10 = 1200	10	2	3
SFC-120FT	1900	p120 x 12 = 1440	12	2	4

No.	DESCRIPTION	MAT'L	Q'TY	REMARK
1	INNER SIDE CASE	ABS	2	-
2	WATER OUTLET	BS	1	PF 3/4"(20A)
3	AIR VENT	BS	1	PT 1/8"(Manual)
4	WATER INLET	BS	1	PF 3/4"(20A)
5	DRAIN PAN	Heat-Resistant ABS	1	Plastic
6	FAN IMPLLER	ABS	E	SIROCCO FAN
7	FAN HOUSING	ABS	E	-
8	DRAIN HOSE	Soft Polyvinyl Chloride	1	Inner Diameter Ø14 Outer Diameter Ø18
9	MOTOR	ASS'Y	D	1Ø 220V 60Hz
10	AIR FILTER	Vinyl Chloride	1	Submerged Type
11	HEAT & COOLING COIL	CU-AL	1	SLIT FIN
12	CONTROL SWITCH	-	1	Rotary Type (Strong, Medium, Weak 3-Stage)
13	GRILLE	Heat-Resistant ABS	C	120*120
14	ACCESS DOOR	ABS	2	120*200
15	EXTERNAL PANEL	CR	1	Powder Coating
16	BASE	Composite PP	2	T/K 30%

Standard Specifications

Horizontal Scroll

Category		Specifications	SFC-20FT		SFC-30FT		SFC-40FT		SFC-60FT		SFC-80FT		SFC-120FT
Capacity	Capacity Conditions		A	B	A	B	A	B	A	B	A	B	A	B
	Cooling Capacity	W	2,790	2,120	3,700	2,810	5,360	4,050	7,220	5,490	10,440	7,870	13,610	10,260
	Cooling Capacity	Kcal/h	2,400	1,820	3,180	2,420	4,610	3,480	6,210	4,720	8,980	6,770	11,700	8,820
	Heating Capacity	W	5,640	3,460	7,780	4,770	10,990	6,710	14,330	8,760	21,240	12,950	23,640	14,340
	Heating Capacity	Kcal/h	4,850	2,980	6,690	4,100	9,450	5,770	12,320	7,530	18,270	11,140	20,330	12,330
	Flow Rate	ℓ/min	8.1	6.0	10.7	8.0	15.4	11.5	20.8	15.7	30.0	22.4	39.1	29.3
	Head Loss	mAq	0.7	0.4	1.6	0.9	4.4	2.4	3.5	2.0	9.5	5.3	16.8	9.4
Fan Blower	Type		Double Suction Multi-Blade Type(SIROCCO FAN)
	SIZE	mm	Ø145 X L165		Ø145 X L200		Ø145 X L165		Ø145 X L200		Ø145 X L200		Ø145 X L200
	Airflow Volume	㎥/min	5.7		8.5		11.3		17		22.6		34
	Drive Type		Direct Drive Motor
	Quantity	EA	1		1		2		2		3		4
Motor	Type		AC Semi-Enclosed Type (6 poles, Class B insulation
	Power Consumption	W	30		40		50		70		40 + 70		70 X 2
	Quantity	EA	1		1		1		1		2		2
Heat Exchanger	Type		Integrated Multi-Pass Cross Finned Tube(Slit Fin)
Pipe	Inlet	A	PF 3/4" (20A)
	Outlet	A	PF 3/4" (20A)
	Drain		Soft Vinyl Hose (Inner Diameter Ø14, Outer Diameter Ø18)
External Material			Galvanized Steel Sheet, Powder Coating
Air Volume Control			Strong, Medium, Weak 3-Stage Rotary Switch
Power Supply			Single Phase 220V 60HZ
AIR FILTER			Vinyl Chloride (Submerged)
Product Weight		Kg	24		27		31		36		41		44
* Note	1. Capacity Condition A - Cooling Capacity When indoor air is DB 27°C, WB 21°C, and inlet water temperature is 5°C Heating Capacity When indoor air is 18°C, and inlet water temperature is 80°C 2. Capacity Condition B - Cooling Capacity: When indoor air is DB 27°C, WB 19.5°C, and inlet water temperature is 7°C Heating Capacity: When indoor air is 21 °C, and inlet water temperature is 60°C

Catalog

Floor-Stand Concealed, Front Suction Type

Product Features

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air.

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air. (Exposed Type)

A general MICOM switch and wireless remote controller switch can be attached.Option

Able to apply 4 Pipe configuration.Option

With the application of a BLDC motor as a standard specification power consumption can be reduced by more than 30% compared to an AC motor with low power and high efficiency.Option

For energy savings, installation of On/Off valves for each unit is recommended.Option

These control the flow in coordination with the unit's operation preventing condensation issues during cooling, and reducing unnecessary operation cycles of the circulation pump

Both central control and group control are available.Option

Central control can be achieved through power line communication and S-485 communication

Group control of up to 16 units can be performed using a wired remote controller.

The use of UV lamps provides outstanding effects in terms of sterilization antibacterial properties odor removal, and addressing sick building syndrome.Option

Korean Patent Registration No. 10-1147406

Floor-Stand Concealed, Front Suction Type

MODEL	A	B (Outlet)	C (Motor)	D (Fan)
SFC-20TFM	540	480	1	1
SFC-30TFM	660	600	1	1
SFC-40TFM	780	720	1	2
SFC-60TFM	1020	960	1	2
SFC-80TFM	1260	1200	2	3
SFC-120TFM	1500	1440	2	4

No.	DESCRIPTION	MAT'L	Q'TY	REMARK
1	INNER SIDE CASE	ABS	2	-
2	WATER OUTLET	BS	1	PF 3/4"(20A)
3	AIR VENT	BS	1	PT 1/8"(Manual)
4	WATER INLET	BS	1	PF 3/4"(20A)
5	DRAIN PAN	Heat-Resistant ABS	1	Plastic
6	FAN IMPELLER	ABS	D	SIROCCO FAN
7	FAN HOUSING	ABS	D	-
8	DRAIN HOSE	Soft Polyvinyl Chloride	1	Inner Diameter Ø14 Outer Diameter Ø18
9	LEVELING BOLT	-	4	6*35mm
10	MOTOR	ASS'Y	C	1Ø 220V 60Hz
11	AIR FILTER	Vinyl Chloride	1	Submerged Type
12	HEAT & COOLING COIL	CU-AL	1	SLIT FIN
13	CONTROL SWITCH	-	1	Rotary Type (Strong, Medium, Weak 3-Stage)

Standard Specifications

Horizontal Scroll

Category		Specifications	SFC-20TFM		SFC-30TFM		SFC-40TFM		SFC-60TFM		SFC-80TFM		SFC-120TFM
Capacity	Capacity Conditions		A	B	A	B	A	B	A	B	A	B	A	B
	Cooling Capacity	W	2,790	2,120	3,700	2,810	5,360	4,050	7,220	5,490	10,440	7,870	13,610	10,260
	Cooling Capacity	Kcal/h	2,400	1,820	3,180	2,420	4,610	3,480	6,210	4,720	8,980	6,770	11,700	8,820
	Heating Capacity	W	5,640	3,460	7,780	4,770	10,990	6,710	14,330	8,760	21,240	12,950	23,640	14,340
	Heating Capacity	Kcal/h	4,850	2,980	6,690	4,100	9,450	5,770	12,320	7,530	18,270	11,140	20,330	12,330
	Flow Rate	ℓ/min	8.1	6.0	10.7	8.0	15.4	11.5	20.8	15.7	30.0	22.4	39.1	29.3
	Head Loss	mAq	0.7	0.4	1.6	0.9	4.4	2.4	3.5	2.0	9.5	5.3	16.8	9.4
Fan Blower	Type		Double Suction Multi-Blade Type(SIROCCO FAN)
	SIZE	mm	Ø145 X L165		Ø145 X L200		Ø145 X L165		Ø145 X L200		Ø145 X L200		Ø145 X L200
	Airflow Volume	㎥/min	5.7		8.5		11.3		17		22.6		34
	Drive Type		Direct Drive Motor
	Quantity	EA	1		1		2		2		3		4
Motor	Type		AC Semi-Enclosed Type (6 poles, Class B insulation
	Power Consumption	W	30		40		50		70		40 + 70		70 X 2
	Quantity	EA	1		1		1		1		2		2
Heat Exchanger	Type		Integrated Multi-Pass Cross Finned Tube(Slit Fin)
Pipe	Inlet	A	PF 3/4" (20A)
	Outlet	A	PF 3/4" (20A)
	Drain		Soft Vinyl Hose (Inner Diameter Ø14, Outer Diameter Ø18)
External Material			Galvanized Steel Sheet, Powder Coating
Air Volume Control			Strong, Medium, Weak 3-Stage Rotary Switch
Power Supply			Single Phase 220V 60HZ
AIR FILTER			Vinyl Chloride (Submerged)
Product Weight		Kg	15		18		20		25		32		40
* Note	1. Capacity Condition A - Cooling Capacity When indoor air is DB 27°C, WB 21°C, and inlet water temperature is 5°C Heating Capacity When indoor air is 18°C, and inlet water temperature is 80°C 2. Capacity Condition B - Cooling Capacity: When indoor air is DB 27°C, WB 19.5°C, and inlet water temperature is 7°C Heating Capacity: When indoor air is 21 °C, and inlet water temperature is 60°C

Catalog

Floor-Stand (Exposed/Concealed) Upper Discharge Type

Product Features

An electric motor with low vibration, low noise, and a long-lifespan die-cast housing has been applied.

Floor-Stand Exposed, Upper Discharge Type

Floor-Stand Concealed, Upper Discharge Type

Standard Specifications

Floor-Stand (Exposed/Concealed) Front Discharge Type

Product Features

An electric motor with low vibration, low noise, and a long-lifespan die-cast housing has been applied.

Floor-Stand Exposed, Front Discharge Type

Floor-Stand Concealed, Front Discharge Type

Standard Specifications

Floor-Stand Exposed, Slant Discharge Type(Rounded)

Product Features

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air.

Floor-Stand Exposed, Slant Discharge Type(Rounded)

Standard Specifications

Floor-Stand Exposed, Slant Discharge Type(Inclined)

Product Features

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air.

Floor-Stand Exposed, Slant Discharge Type(Inclined)

Standard Specifications

Floor-Stand Concealed, Front Suction Type

Product Features

A discharge grille with an airflow direction adjustable by 90 degrees is used to evenly distribute indoor air.

Floor-Stand Concealed, Front Suction Type

Standard Specifications